Siemens Gigaset C34 - Manual (Page 14)

13
Handset settings
Gigaset C34 / ISR eng / A31008-M1607-B501-1-7619 / start_guide_time.fm / 22.3.05
If you accidentally choose a language you
do not understand:
§Menu§
5 I 1
Press keys one after the other.
q Select the correct language
and press §OK§ .
Setting/changing the
screen picture
You can display a screen picture when the
handset is in idle status. This will replace
the idle status display. It may conceal the
date, time and name.
The picture is not displayed in certain situ-
ations, e.g. during a call or when the
handset is de-registered.
§Menu§
¢
Settings
¢
Screen Picture
The current setting is indicated by ‰.
You have the following options:
No Screen Picture
No picture is displayed.
Standard Picture
The default picture is displayed.
Download Picture
Any downloaded picture is displayed.
Activating/deactivating Auto talk
When this function is activated, when a
call arrives you can simply lift the handset
out of the charging cradle without having
to press the talk key c.
§Menu§
¢
Settings
¢
Handset
Select Auto Answer and
press §OK§ ( ‰ = on).
a Press and hold (idle status).
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree speaking to five different levels
and the earpiece volume to three different
levels. You can only make these adjust-
ments during a call.
The handsfree volume can only be
adjusted when this function is set.
You are conducting an external call.
t
Press the control key.
q Adjust the volume and
press §OK§ .
If t is assigned a different function, e.g.
toggling:
§Menu§ Volume
Select Volume and press §OK§ .
q Adjust the volume and
press §OK§ .
Changing ringer tones
u Volume:
You can choose between five volumes
(1–5; e.g. volume 2 = ˆ) and the
"crescendo" ring (6; volume increases
with each ring = ‰ ).
u Melody:
You can select a melody from the list of
pre-installed ringer melodies or install a
melody that you have downloaded.
The first three melodies are the "classi-
cal" ring tones.
You can also set different melodies for the
following functions:
u External Calls : For external calls
u Internal Calls : For internal calls