Snapper ZMT2500KH-1 - Manual (Page 6)

6
DECK LIFT LEVER WITH
RELEASE BUTTON
OPERATOR’S SEAT
FUEL TANK
BLADE
ENGAGEMENT
SWITCH
KEY SWITCH
PARKING BRAKE
LEVER
DISCHARGE
DEFLECTOR
ENGINE SPEED CONTROL
(INSIDE LEVER)
CHOKE CONTROL
(OUTSIDE LEVER)
MOTION CONTROL
LEVERS
AUXILIARY FUEL
TANK
Section 1 - FAMILIARIZATION
FIGURE 1.1
1.1 INTRODUCTION
This manual has been prepared for the operator’s of the
SNAPPER MID MOUNT Z-RIDER. Its purpose, aside from
recommending standard operating procedures and routine
service requirements, is to promote SAFETY through the
use of accepted operating practices. Read, Understand and
Follow the IMPORTANT SAFETY INSTRUCTIONS on
Pages 2 thru 4 of this manual and All SAFETY messages
on the MID MOUNT Z-RIDER and its attachments before
operating. SNAPPER recommends returning the MID
MOUNT Z-RIDER to an authorized SNAPPER dealer
annually for inspection and addition of any new devices
which might upgrade the safety of the mower.
1.2 NOMENCLATURE
The nomenclature information above, Figure 1.1, shows
the essential parts of the SNAPPER MID MOUNT Z-
RIDER. It is recommended that all operator’s of this
equipment become thoroughly familiar with the controls,
components, and operation of this machine before
operating. Specific details involving the engine are found
in the separate engine owner’s manual. Study these
manuals before operating and keep both handy for future
reference. For the nearest SNAPPER dealer in your
area, check the yellow pages under the heading LAWN
MOWERS. For engine parts and service, look for the
engine manufacturer’s dealers under the heading,
ENGINES - gasoline.