Sharp AL-1551 - Manual (Page 20)

18
3
Making copies
NORMAL COPYING
This copier has two document input stations - a reversing single pass feeder (RSPF) for automatic
document feeding and an original table for manual handling of documents. The RSPF is designed
to hold up to 30 originals measuring from 5-1/2" x 8-1/2" to 8-1/2" x 14" and weighing from 14
to 23 lbs.
When copying from the RSPF, two-side originals can be copied automatically without having to
manually turn them over.
Automatic two-sided copying can also be performed with this copier. When copying from one-
sided originals to two-sided copies, copying orientation can be selected between Turn on Long
Edge and Turn on Short Edge.
A
A
A A
A
A
A A
● When making two-sided copies from the original table, the copy paper size
must be letter. When making two-sided copies from the RSPF, letter, legal,
and invoice sizes can be used. Non-standard size paper cannot be used.
● When making two-sided copies from the RSPF, a multiple number of copies
cannot be set.
● When making two-sided copies, the bypass tray cannot be used.
● When using two-sided invoice size originals from the RSPF, be sure to place
them in the landscape orientation. Otherwise, an original misfeed will occur.
1
Ensure that paper of the desired size is set in the paper tray. See page 13, LOADING
COPY PAPER. When copying onto paper larger than 8-1/2" x 11" size, pull out the
paper output tray extension. If you use another tray, use the tray select (
) key to
select the desired paper tray.
2
Turn the power switch on.
3
Place the original(s) face up in the document feeder tray or face down on the original
table.
Turn on Long Edge Turn on Short Edge