Sprint Nextel Sprint PCS Vision Smart Device PPC-6700 - Manual (Page 70)

64 Section 5: Managing Your PPC-6700 Section 5: Managing Your PPC-6700 Section 5: Managing Your PPC-6700 Section 5: Managing Your PPC-6700
To remove programs:
You can only remove programs that you installed. Programs
that have been pre-loaded onto your PPC-6700 cannot be
removed.
1. Tap Start > Settings > System tab > Remove Programs.
2. In the Programs in storage memory list, select the
program you want to remove, and then tap Remove.
3. Tap Yes. If another confirmation message appears, tap
Yes again.
5.3 Managing Memory
You may need to stop a program if it becomes unstable or the
program memory is low.
To see how much memory is available:

Tap Start > Settings > System tab > Memory. On the Main
tab, the amount of memory allocated to file and data
storage versus program storage is displayed, as well as the
amount of memory in use versus the available memory.
To see available storage card memory:
You can see how much memory is available on a storage card
that is inserted in the device.
1. Tap Start > Settings > System tab >Memory.
2. Tap the Storage Card tab.
Tip:
If you have previously inserted more than one storage card,
tap the list box and then the storage card whose information
you want to see.