Smeg A1XCU6 - Manual (Page 5)

Instructions for the Installer
7
2.1 Product dimension
Overall dimension: location of electrical connection points.
A 7” - 180 mm
B 6”
3
/
4
- 170 mm
Check location where the range will beinstalled. The range should be located for convenient use in the
kitchen.
NOTE: Observe all governing codes and ordinances.
All openings in the wall or floor where range is to be installed must be sealed.
Some cabinet and building materials are not designed to withstand the heat produced by the
oven for baking. Check with your builder or cabinet supplier to make sure that the materials used
will not discolor, delaminate or sustain other damages.
Cabinet opening dimensions that are shown must be used. Given dimensions are minimum clearances.
When installing a range under existing cabinets and the installation does not satisfy the minimum
cabinet clearances, install a range hood above the cooktop to avoid burn hazards.