Siemens S65 - Manual (Page 95)

©
Sieme
ns
AG
2003, L:\Mobil\R65\S65_
Penelope
_v2\en\fug\S65
_Se
curity.fm
Setup 94
VAR Langua
ge: en; V
A
R issue
date: 040517
left page (94) of S65 FUG en, A31008-H7400-A1-1-7619 (21.01.2005, 10:09)
Setup Security
C
¢
T
¢
Security
¢
Select function.
Auto key lock
The keypad is locked automatically if
no key has been pressed for one
minute in standby mode. This pre-
vents the phone from being used
accidentally. However, you can still
be called and you can still make an
emergency call.
Direct call
(Phone-code protected)
Only one phone number can be
dialled (see also p. 28).
Only
‚
b
(PIN2 or phone-code protected)
Dialling options are restricted to SIM-
protected phone numbers in the
Phonebook. If only area codes are
entered, relevant phone numbers
can be added to these manually
before dialling.
If the SIM card does not support PIN2
input, the whole Phonebook can be
protected with the phone code.
Codes
For description, see p. 18:
PIN control , Change PIN , Change PIN2 ,
Chg.phonecode
This SIM only b
(Phone-code protected)
The phone can be connected to a
SIM card once the phone code is
entered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a dif-
ferent SIM card, enter the phone
code when requested.
Additional information
The keypad can also be directly locked and
unlocked in standby mode.
In each case:
#
Press and hold.
S65 FUG en, A31008-H7400-A1-2-7619