Siemens S65 - Manual (Page 98)

©
Siem
ens AG
2003, L
:\Mobi
l\R65
\S65
_Penelop
e_v2\e
n\f
ug\S65_N
etwo
rk.fm
97 Setup
VAR Langua
ge: en; V
A
R issue
date: 040517
left page (97) of S65 FUG en, A31008-H7400-A1-1-7619 (21.01.2005, 10:09)
Your service provider is displayed:
§List§ Display list of preferred
networks.
Create/change entry:
<Empty> or select an existing entry,
then select a new service
provider in the list and
confirm.
Record new service provider
(last entry in the list):
Furth.network
Select, enter the provider data and
save it.
Band selection b
Select either GSM 900, GSM 1800 or
GSM 1900.
Fast search
When this function is active, net-
work reconnection is speeded up
(standby time is reduced).
User group b
Depending on the service provider,
you can create groups with this serv-
ice. These can have access to inter-
nal (company) information, for
example, or special rates apply.
Please check with your service pro-
vider for details.
Active
Activate/deactivate function. “User
group” must be deactivated for nor-
mal phone use.
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are
obtained from your service provider.
All outgoing
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
Pref. group
If activated, calls may only be made
within this standard user group
(depending on the network configu-
ration).
Additional information
If you are outside your home network, your
phone automatically dials another GSM
network.
If the signal strength of the preferred net-
work is inadequate when you switch on the
phone, the phone may register in a differ-
ent network. This can change when the tel-
ephone is next switched on or if another
network is selected manually.
S65 FUG en, A31008-H7400-A1-2-7619