Samsung ANYCAM SNC-35E - Manual (Page 2)

CAUTION
Issues that require special attention during AnyCam installation:
Avoid installing near heating equipment, humidified area, and direct sunlight.
The most suitable operating conditions are: 5 ~ 35 °C, 30 ~ 80% RH
Do not install in dusty areas, or where water (rainwater) can come in contact with the
Camera.
Keep away from magnets or sound equipment such as speakers; these could negatively
affect image quality or sound transmission.
Do not install in unstable place. Dropping or jarring the camera might cause damage or
render the camera inoperative.
Issues that require special attention during AnyCam use:
The following safety condition issues are to prevent any damage due to mistreatment and
to extend camera life.
Please read the issues carefully and use the camera according to these recommendations.
1) Take the USB cable out when it is not in use for long time.
2) Clean the camera and lens with soft cloth.
Do not touch or wipe the lens with bare hands.
Do not use spray water or the inflammables like benzene or thinner to clean.
3) Do not bend or pull the USB cables with great force.
4) Do not turn part of lens abruptly.
5) Do not leave coffee or drinks near the camera.
6) Do not disassemble, repair, or rebuild the unit.
Contact sales service center or the dealer for repairs.
7) For more detailed information, please visit Samsung Internet site.
http://www.samsunganycam.com or http://www.anycam.co.kr
Program upgrades or installation software can be downloaded from Internet.
Q & A section can be used to get answers or solutions for any problems with the
product.
2