Samsung ANYCAM SNC-35E - Manual (Page 6)

Device Manager)
< ‘1) USB Composite Device’ in ‘the Universal Serial Bus Controllers directory”,
‘2) USB Audio Device’ in the “Sound, video and game controllers directory’, ‘3)
SNC-35E Video’ in the Imaging device directory” >
If you checked that above three devices are installed properly, please run the AnyCam
and enjoy the AnyCam world.
If the installation failed, follow the instructions below.
When you open the device manager in “My Computer”, you may find the error
shown in the figure below.<FIG 13>
Right click on the error
Click “Update Driver” for the device driver and then select the driver path. The default
selection is recommend.
Click the button for “Reinstall Driver” and the Hardware Update Wizard will start.
<FIG 13> <FIG 14>
Click the radio button for “Install from a list or specific location (Advanced)”and
click “Next”.
If you insert the installation CD, specify the “Search for removable media
(Floopy.CD-Rom)” and press the “Next”.
Click the “Finish” button.
To verify if the installation of the device has been completed, check the following
three devices in the Device manager, shown in the next figure. <Fig15>
6