Smeg SM1634 User Manual
Page 5
SM1634
15
NOTES AND USEFUL ADVICE FOR THE USER
DESCRIPTION OF THE MACHINE
THE MANUFACTURER WILL NOT BE HELD
RESPONSIBLE FOR ANY ACCIDENTS
THAT MAY RESULT FROM NON-COMPLI-
ANCE WITH THE REQUIREMENTS OF
SAFETY STANDARDS OR THIS INSTRUC-
TION MANUAL
A
- Glass door
B
- Filter
C
- Adjustable feet
D
- Top cover
E
- Drum
F
- Control panel
1
The washing machine is a household appliance that can wash any type of fabric whenever you want.
▼
The structure of the machine is fabricated in steel sheet, which has been worked using a special
process and then enamelled in order to maintain its external appearance and protect it against
corrosion.
▼
The motor and all the other moving parts are built to ensure noiseless machine operation.
▼
The large stainless steel drum is well placed to guarantee a good wash quality and prolong the life
of the washing.
▼
The easy to use control panel makes the selection of any wash or dry programme quick and
simple (see control panel and table of programmes).
▼
The ample glass door makes loading and unloading easier.
▼
The perfect machine balance is the result of many years of research aimed at finding the correct
balance between the various moving parts.
GB
❃
Clothes that have been dirtied with sub-
stances containing petroleum cannot be
washed in the machine. If stains have been
removed using vaporising products, before
loading the clothes in the washing machine,
wait until the substances have completely
evaporated from the material.
❃
Do not use detergents formulated for hand
washing, in that the excessive lather pro-
duced could damage the internal compo-
nents.
❃
After washing rugs, blankets or any other long
fibre fabrics, remember to check the filter and,
if necessary, clean it.
❃
It is advisable to leave the door open at the
end of the wash cycle.
❃
Under no circumstances should any repairs
to the machine be attempted by unqualified
persons as this could result in serious dam-
age and will invalidate the guarantee.
❃
Repairs to the washing machine must only
be carried out by persons authorised to do
so by the service centres. Only original spare
parts may be used for repairs.