Sony PEG-TJ25 - Manual (Page 46)

46
Sony Personal Entertainment Organizer PEG-TJ35/TJ25 3-087-353-11 (1)
Applications do not operate properly after a soft
reset is performed
B If you encounter application problems (such as improper operations, unusual display,
or freezing during a soft reset) after you performed a reset, the reset may not be
completed properly. In such a case, perform a soft reset once again (page 32). If you
still cannot solve your problem, try a hard reset (page 33).
After performing a reset, do not press the RESET button at the back of your CLIÉ
handheld again until the Preferences screen or the Setup screen is displayed.
I cannot use the Jog Dial™ navigator
B The Jog Dial™ navigator (page 60) is not available for some applications.
An error message appears repeatedly
B Perform a soft reset by pressing the RESET button at the back of your CLIÉ handheld
(page 32).
The message “Invalid process” appears when an
application is started
B If there is insufficient memory space in your CLIÉ handheld or “Memory Stick”media,
applications may not work properly. Delete any unnecessary data/files.
My CLIÉ handheld does not recognize handwritten
characters (when using Graffiti
®
2 )
B To have your CLIÉ handheld recognize handwritten characters entered with the stylus,
you must use Graffiti
®
2.
b For details, refer to “Entering text on your CLIÉ™ handheld: Using Graffiti
®
2 writing to
enter text” in “Handbook” (PDF format).
B Make sure you enter the Graffiti
®
2 strokes in the Graffiti
®
2 writing area (page 66).
B Make sure you enter the Graffiti
®
2 strokes for letters in the left side of the Graffiti
®
2
writing area and numbers in the right side (page 66).
B Check that Graffiti
®
2 is not shifted into Symbol mode.
b For details, refer to “Entering text on your CLIÉ™ handheld: Using Graffiti
®
2 writing to
enter text” in “Handbook” (PDF format).
Error messages
I cannot enter text properly
Note on performing a reset