Sanyo HT27547 - Manual (Page 17)

❶
❷
17
VIDEO2 COMPONENT JACKS: Connection Option 3
1 Connect a Component Cable to the VIDEO2 Green,
Blue, and Red video jacks.
2 Connect an Audio Cable to the VIDEO2 White and
Red audio jacks.
3 Press INPUT to select Video 2 to view the program.
CONNECTING A GAME SYSTEM
GAME SYSTEM
GREEN, BLUE,
RED VIDEO
JACKS
DTV VIDEO2
AUDIO L/R
JACKS
OPERATING TIPS:
◆Press the INPUT key after connecting cables to access the VIDEO2
input. There is NO need to tune to a blank channel.
◆Refer to the owner’s manuals and user’s guides that came with your
external equipment for connection options.
SYMPTOM CHECK THESE CONDITIONS TRY THESE SOLUTIONS
“No Signal” will appear randomly
on the screen when no signal is
detected at the video jack. ● Check Audio / Video connections.
● Check external equipment
connections.
● Check external equipment
setting.
● Press the INPUT key.
● Switch on external equipment.
● Set external equipment output
connections to match input
connections.
If you continue to experience problems, please call toll free
1-800-877-5032. We can Help!
HELPFUL HINTS (PROBLEMS/SOLUTIONS)
REMOTE CONTROL
❸
INPUT