Kenyon UL/C-UL - Manual (Page 11)

STEP #5
Electrical Connection
Before proceeding further, verify that the power supply is disconnected. Verify that the
appropriate electrical supply requirements have been met. Please refer to the table on
page 2 for appropriate electrical requirements. The cook top is supplied with
a 48-inch long conduit for a connection to an accessible junction box. The conduit
consists of three insulated wires. There are two insulated hot lead conductors (both tinned
copper) and one insulated ground conductor (green insulated-tinned copper).
Attach conductor wires to residence wiring in accordance with national, state and local
electric codes.
Warning - Grounding
The entire appliance must be grounded at all times when the
electrical power supply is on. Do not ground the appliance
with the neutral house supply wire (white). A separate ground
must be used.
STEP #6
Final Preparations Prior to Use
Remove the plastic film from the cook top. Clean the cook top before you use it
for the first time. A thorough cleaning with a recommended cook top cleaner
(Cerama Brite Ceramic Cook Top Cleaner) will provide a clean, shiny coating on the
cook top surface.
The next section of the manual covers cook top use, maintenance, safety and service
information.
Please keep these instructions with the KENYON cook top for future reference.
6
!