Kenyon UL/C-UL - Manual (Page 9)

Allow a 2” minimum clearance between the bottom of the metal pan of the cook top and any
combustible surface located below, ie: the upper edge of a drawer installed below the
cook top (see Fig. B on previous page). Failure to provide proper clearances and ventilation
may result in a fire hazard.
Cook top dimensions and countertop cutout dimensions for each model are shown below:
Note:
When making countertop, radius
the corner of the cutout (1/4” radius
is typical). This will prevent cracking
of the countertop. Follow the
countertop manufacturer’s
instructions regarding the minimum
corner radius and reinforcement of
corners.
4
2 5/8"
12"
21"
20"
10 3/4"
14 1/4"
23 1/4"
2 5/8"
21 3/4"
12 1/4"
Model : MED2 & ALP2LG Models: MED2TL , CAR2, ALP2SM
12" 12 1/2"
11 1/2" 10 1/4"
2 5/8"
Models: MED1 & CAR1 & ALP1