Kawai CN21 - Manual (Page 32)

Page
32
APPENDICES
6
2) ASSEMBLY INSTRUCTIONS
Before attempting to assemble the CN21 piano, ensure that all parts are included.
A Phillips-head screwdriver will also be required to assemble the unit (not included).
„ PARTS PROVIDED
Side Panel (A) .............................................. 2pcs.
Back Panel (B) ..............................................1 pc.
Pedal Board (C) ............................................1 pc.
Screw (D) .................................................... 2 pcs.
Screw (E) .................................................... 4 pcs.
Bolt (F) ........................................................ 4 pcs.
Bolt (with plain washers and
spring washers) (F') .................................... 4 pcs.
Adjuster (G) ..................................................1 pc.
Headphone hook set
x Headphone hook .....................................1 pc.
x Tapping screw ........................................ 2 pcs.
„ ASSEMBLY SEQUENCE
1. Insert the Adjuster (G) on the bottom of Pedal Board (C).
Untie the connection cord from the Pedal Board and pull it
out.
Fasten Side Panel (A) and Pedal Board (C) with four bolts (F).
Ensure that the bolts are fastened tightly.
Use the correct side panel for the left side and the right side
of the unit.
Ensure that the pedal cable is not caught between the
assembled parts.
2. Fasten Side Panel (A) and Back Panel (B) with two screws (D).
Then fi x Back Panel (B) to Pedal Board (C) with four screws
(E).
Caution y Ensure that this section is read thoroughly before attempting to assemble the CN21 piano, and that
two or more people work on unit assembly.
y When moving the CN21 piano, ensure that hands are not caught in the unit, and that the piano is not
dropped on an individual’s feet.
Bolt (F)
M6 ° 25
Bolt (F')
M6 ° 25
Screw (D)
4 ° 30
Screw (E)
4 ° 20
Adjuster (G)
(F')
Pedal support insert hole
(back of the pedal board)
(A)
(G)
Arrow
(C)
(C)
(B)
(D)
(E)
(A)