Kingston Technology PCREAD/SSFDC - Manual (Page 13)

Hardware Installation 7
SSFDC ™ Card Reader - Rev. A00 Kingston Technology Company
3. For AT style keyboards, you will attach the DC power cable as
shown below. First, unplug your keyboard from the computer’s rear
panel. Plug the end of power adapter cable with the AT connector
directly into the keyboard connector on your computer’s rear panel.
At the opposite end of the power adapter cable, plug in the “PS/2 to
AT adapter” as shown in the illustration below. Now, plug the cable
extending from your keyboard into the “PS/2 to AT adapter.
Note: When power is applied, the LED on the SSFDC ™ Card Reader
will remain constantly lit. When a PC storage card is inserted or
accessed the LED will flicker.
AT Keyboard
Configuration
Plugs into the Cable
extending from your
AT Keyboard
PS/2 to AT
Keyboard Adapter
AT Connector
AT Keyboard Connection
4. The hardware installation is now complete.