Kyocera K132 - Manual (Page 34)

26 Retrieving text messages
Note: If you receive a new message while you are
reading a message, the one you are reading will
be replaced by the new one. You can find the
older message in the InBox:
• Select Menu
→
Messages
→
InBox .
If you see the symbol
1. Select Menu
→
Messages
→
InBox . A list of all
your received messages appears.
–
indicates an “Urgent” message.
2. Scroll through the list of messages and press
to read one.
Reading the message
The options available to you may vary. Check with
your service provider.
1. If the text message is long, press down to
view the entire message.
2. When you are finished, you can Reply to the
sender, Erase the message, Save the message
to your Saved folder, or set additional Options
for the message:
–
Erase the message.
– Lock Msg to protect the message from
being accidentally deleted.
– Forward the message.
– Reply with Copy to reply to the message
with a copy of the original attached.
– Save Message to save the message.
– Save as QuickText to save the text from the
message as QuickText, which you can
insert into other messages. Graphics and
sound are not saved as part of
QuickText.(For more about QuickText, see
page 27.)
– View Sender information.
3. Select Done .
Setting message alerts
You can set your phone to alert you of incoming
text messages or pages. For more information,
see “Setting message alerts” on page 31.
Blocking unwanted messages
You can block messages from particular senders
by adding their addresses to a “block list.”
1. Select Menu
→
Settings
→
Messaging
→
Block Msgs .
2. Do one of the following:
– To block an address, select
Block Address
and enter the address into the provided
field.
– To unblock an address, select Unblock
Address and enter the address into the
provided field.
– To see a list of blocked addresses, select
Get List.
82-G1710-2EN.book Page 26 Tuesday, October 3, 2006 9:45 AM