Konftel 100 R - Manual (Page 12)

Trouble shooting
1 Check that the microphone is connected. The
red LEDs must be lit.
2 Adjust KonfTel 100 R manually.
3 Check that KonfTel 100 R is connected to an
analogue telephone jack.
4 Check that all cables are correctly connected.
5 Bypass any extension cables and check that the
system is functioning correctly. If not, contact
your dealer.
The microphone and loudspeaker are connected by
pressing one of the On/Off keys. The green indica-
tor lamp on the key set lights up to show that
KonfTel 100 R is connected, and the three red LEDs
light up to show that the microphone is switched on.
The functions of the standard telephone remain
disconnected for as long as KonfTel 100 R is
switched on.
Maintenance
Clean the equipment with a dry, soft cleaning cloth.
Do not use any liquids!
TROUBLE SHOOTING AND MAINTENANCE
10