Kodak XLS 8400 - Manual (Page 108)

UNIX Workstations and Servers
Part No. 1H9613 June 1997 12-9
5. Enter the following command to start the print scheduler:
/usr/lib/lpsched
6. Enable the printer by entering the following command:
enable <printername>
7. Enter the following command to make the printer accept
connection:
accept <printername>
Using the admintool
You can also use system administration tools (the Solaris
admintool or HP/UX SAM, for example) to install the printer.
However, you need to use the lpadmin command to actually add
the printer as a new printer.
HP/UX Systems
Installation is similar to the SUN Solaris manual installation with
the exception of the following use of lpadmin:
lpadmin -p<printer name> -mrmodel -orpps -v/dev/null
ocmrcmodel
-orm<host printername> -osmrsmodel -ob3
<Printer name> can be anything you want to call your printer. It
can be the same as <host printer name>. However, doing this
makes corresponding printer name associations more confusing.