Kawai Professional Stage Piano MP8II - Manual (Page 11)

11
[EFFECT BUTTONS]
11. SW button
This button turns the assigned function ON or OFF. Many different functions can be
assigned to this switch for your convenience.
When in edit mode, pressing the SW button will exit from edit mode.
12. EFX button
This button turns the EFX ON or OFF for the selected zone.
13. REVERB button
This button turns the REVERB ON or OFF for the selected zone.
To change the function or type assigned to the above buttons, press and hold the desired
button to display the currently selected function or type, then use the VALUE buttons to
change it.
[MENU BUTTONS]
14. MENU buttons
The MENU buttons are used to enter the edit mode and scroll through all the various
parameters of the MP8II. To change a parameter value, use the VALUE buttons.
[DISPLAY]
15. DISPLAY
[VALUE BUTTONS]
16. VALUE buttons
The VALUE buttons are used to change the value of the current parameter as indicated
on the DISPLAY.
[SOUND SELECTION & SETUP SELECTION]
17. SOUND button
The SOUND button switches the MP8II to the SOUND mode. The PATCH buttons will
now select any of the 256 internal sounds.
18. SETUP button
The SETUP button switches the MP8II to the SETUP mode. The PATCH buttons will now
select any of the 256 SETUPs.
19. SOUND SELECT buttons
The SOUND SELECT buttons are organized in two rows of eight buttons and one row of
four ones. In SOUND mode the upper row of buttons is used to select a sound category
and the second & third rows of buttons is used to select the different internal sounds
within each category. In SETUP mode the upper row of buttons is used to select a bank
and the second & third rows of buttons is used to select the different SETUPs within each
bank.
[OTHERS]
20. STORE button
The STORE button is used to store the settings of the MP8II.
21. SYSTEM button
The SYSTEM button is used to set the system parameters of the MP8II.
22. TRANSPOSE button
The TRANSPOSE button is used to turn the TRANSPOSE function ON/OFF.