Kawai Professional Stage Piano MP8II - Manual (Page 16)

16
In Sound mode, the “1” in the display indicates that the zone 1 is currently
selected.
When the multitimbre is off, the default settings of the zones are as follows.
It is recomended for simple MIDI transmit/receive use on stage etc.
The default TXchannel is System Ch (see page45).
Zone 1 Internal On (Plays internal sound)
Zone 2 Internal Off (Muted)
Zone 3 External On (Plays external device)
Zone 4 External Off (Muted)
When the multitimbre is on, the default settings of the zones are as follows.
It is recomended for recording/playback with PC or sequencer.
The default TXchannel is System Ch (see page45).
The system channel mode is Panel:
Zone 1 Both
On (Plays internal sound & external device)
Zone 2 int Off (Muted)
Zone 3 int Off (Muted)
Zone 4 int Off (Muted)
The system channel mode is Normal:
Zone 1 Both
On (Plays internal sound & external device)
Zone 2 Both Off (Muted)
Zone 3 Both Off (Muted)
Zone 4 Both Off (Muted)
The zone mode for each zone is indicated by the INT/EXT LED beside the
faders. The zone status for each zone is indicated by the ZONE ON/OFF
buttons. If the ZONE buttons is red, this zone is assigned to the entire
keyrange of the MP8II. If the button is green, the key range for that zone
is less than the entire key range. You can check the key range setting by
holding the SELECT button for the zone for 1 second.