Kensington MP-15E - Manual (Page 11)

11
Names and Functions of Each Section
■ Input Output Terminals
PC Video Input Terminal
RGB Signal Output Terminal
PC Audio Input Terminal
Video Deck Audio Input Terminals
Video Deck Video Input Terminal
S-VIDEO Input Terminal
Audio Output Terminal
Test (maintenance) Terminal
R L V OUT IN
PC-AUDIO VIDEO-IN
S-VIDEO
TEST RGB-OUT PC-IN
PC Video
Input Terminal
RGB Signal
Output Terminal
Test (maintenance)
Terminal
PC Audio
Input Terminal
Audio Output
Terminal
Video Deck Audio
Input Terminal
Video Deck Video
Input Terminal
S-VIDEO Video Deck
Input Terminal
Input terminal for the PC analog RGB signals
When OHP is selected, OHP images are output.
When PC/VIDEO is selected and during standby, input PC video is
output as it is.
Audio input terminal for a PC (stereo compatible)
Audio input terminals for a video deck (stereo compatible)
Input terminal for video deck (NTSC/PAL/SECAM)
Input terminal for video deck (Y/C)
Audio output terminal for MP-10
This terminal outputs audio (either from the PC or video deck) that is
currently being input. In the standby mode, PC audio is output.
When OHP input is selected, PC audio is output.
This exclusive terminal is used when performing maintenance and
in-house tests.
It cannot be used for other connections.