Kensington MP-15E - Manual (Page 32)

32
■ PC Zoom
The functions described here can be operated only when PC input is selected.
The zoom function can be operated on the remote controller.
1
Select the input.
Select PC (personal computer) as the video source to be
displayed. The PC input image is displayed.
* You can select the input on either the main unit or the remote
controller.
2
Select the zoom ratio.
Select the zoom (enlargement ratio) by the ZOOM button on
the remote controller.
Pressing the
button enlarges the image up to 4x.
Pressing the button reduces the image down to 1x.
* You can select any zoom ratio (enlargement ratio) up to 4x.
3
Move the zooming position.
Press the arrow buttons on the remote controller to move the
zooming position of the image.
Button: Moves the position up.
Button: Moves the position down.
Button: Moves the position to the left.
Button: Moves the position to the right.
* Blank areas may appear at the top, bottom, left or right in the
PC signals that are input to the projector on the zoom
display area.
Main Unit Operation
VIDEO PC
OHP
Remote Control Operation
Remote Control Operation
Remote Control Operation
OHP
PC VIDEO
ZOOM
PUSH
SET