Kyocera KX9e - Manual (Page 20)

12 Tracking calls
2. Press to select OK after reading the
message.
3. Select Enabled or Disabled .
4. Select Yes or No to set the date and time.
5. Press to select Done .
Tracking calls
You can track the number and duration of calls
made and received on your phone.
1. Select Menu → Recent Calls .
2. Select a timer:
–
Recent Calls Timer tracks all calls you
have made and received since you last
reset this timer. To reset this timer, press
to select Reset .
– All Calls Timer tracks all calls you have
made and received. This timer cannot be
reset.
Timing your calls
You can set your phone to beep 10 seconds
before each minute passes when you are on a call.
• Select
Menu → Settings → Sounds →
Minute Alert → Enabled .
Understanding roaming
Setting an alert for roaming
The phone can alert you when you roam outside
of your home service area.
1. Select Menu → Settings → Network →
Roam/Svc Alert .
2. Select an option and press .
– When no svc alerts you with three tones
decreasing in pitch when service is lost
and three tones increasing in pitch when
service is acquired again.
– On roam change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
– On any change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones
if the phone loses service.
Setting the roam ringer
You can set a ringer to indicate when an incoming
call will be subject to roaming charges.
• Select
Menu → Settings → Sounds →
Roam Ringer → Enabled .
Setting Call Guard
You can set the phone to warn you before you
answer or place a call while roaming.
• Select
Menu → Settings → Convenience →
Call Guard → Call Prompt .
– The phone now emits a distinctive roam
ring to indicate when you are roaming
during calls.
82-G1677-1EN.book Page 12 Wednesday, June 7, 2006 2:06 PM