Installing the battery, Charging the battery – Kyocera KX9e User Manual

Page 9

Advertising
background image

User Guide for the Kyocera KX9e Phone

1

1

G

ETTING

S

TARTED

Installing the battery

Your Kyocera KX9e phone comes with a
removable lithium ion (LiIon) battery.

Fully charge the battery before using the phone.

To install the battery:

1.

Hold the phone face
down.

2.

Toward the bottom of the
phone there is a recess
to aid you in opening the
battery door. Use your
fingernail to pull the
battery door away.

3.

Place the battery in the
phone casing with the
metal contacts toward
the bottom of the phone.

4.

Place the battery door
tabs in the openings near
the top of the phone.

5.

Press the battery door
until it clicks into place.

Note:

Before you remove the battery, make sure

the phone is powered off.

Charging the battery

You must have at least a partial charge

in the

battery to make or receive calls.
To charge the battery:

1.

Connect the AC adapter
to the jack on the bottom
of the phone.

2.

Plug the adapter into a
wall outlet.

The battery icon in the upper-right corner of the
screen tells you whether the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged

Note:

The battery will not charge if you use the

phone while it is connected to an AC adapter.

Recharging the battery

You can safely recharge the battery at any time,
even if it has a partial charge.

82-G1677-1EN.book Page 1 Wednesday, June 7, 2006 2:06 PM

Advertising