Kenwood HD Radio TUNER - Manual (Page 11)

Connecting Wires to Terminals
■ If you want to connect the Control unit
Control unit
HD Radio tuner
Disc changer, etc.
To Kenwood disc changer/
HD Radio control input
To control unit
To Kenwood disc changer/ External
optional accessory
FM/AM antenna
• To connect these leads, refer to the relevant
instruction manuals.
(Front side)
(Rear side)
Connection wire (Accessory 1)
• When you use Controller unit (optional accessory), refer to <If you want to connect the Controller> of the next page
and connect Controller unit.
• When the control unit is connected, you cannot
use this "TO CONTROLLER" input terminal.
Antenna cable
(Accessory
6)
• When connecting multiple units (such as the CD Changer and KCA-
S210A), connect the KTC-HR100TR/ KTC-HR100MC directly to the
control unit.
English | 11