KORG XTENDED DEFINITION D32XD - Manual (Page 141)

131
Reference
Counter Rename
METER
CH
VIEW
MIXER
EFFECT
CD
SYSTEM
MIDI/ SYNC
TEMPO
SONG
TRACK
UNDO
STORE
SCENE
MARK
SCRUB
LOC1/IN
...LOC6
ENTER
MARK JUMP
REC/PLAY
MODE
Transport
keys
6-6. Word Clock
The “Word Clock” tab page displays the current word clock
source and frequency, and lets you make synchronization
settings for the audio data clock.
You may hear noise if synchronization cannot be achieved. Before
you change these settings, please turn down the faders or turn
down the volume of your monitor system.
1. Clock Source
Press this button to display the Clock Source dialog box.
Select a clock source, and press the OK button to display
the Working dialog box. If you decide not to change the
clock source, press the Cancel button. Synchronization to
44.1 kHz, 48 kHz, and 96 kHz is supported, but 96 kHz is
not supported for ADAT.
Internal: Synchronize to the internal clock.
S/P DIF: Synchronize to the S/P DIF clock.
External Word Clock: Synchronize to the word clock.
ADAT: Synchronize to the ADAT clock.
When the clock calculation is finished, the display will
indicate “Completed.” Press the OK button, and the
“Word Clock”
tab page will indicate the frequency of the
clock source.
If the display indicates “Error,” check the “Clock Source”
settings and the connections of your devices.
You can select Word Clock or ADAT only if the optional
ADAT I/O board (DIB-8) is installed.
If the digital input audio sounds wrong, or if “Audio Sync Er-
ror”
is displayed, check the “Clock Source” setting or the
connections from your other equipment.
If you have selected other than “Internal” as the “Word
Clock Source,”
the D32XD/D16XD will stop operating if the
clock is interrupted during recording/playback or if the clock
frequency changes. If the D32XD/D16XD stops operating due
to a clock problem during recording, please format that song
drive.
The clock source setting is not saved. “Clock Source” will al-
ways be set to “Internal” when you select a song or when you
turn on the power.
7-1. MIDI/MMC
On the D32XD/D16XD you can use MIDI to do the following
things.
• Control effects (
→p.59)
• MTC Synchronizing with a sequencer or other MIDI
device ( →p.93)
• Switch scenes ( →p.53)
• Use control changes to control mixer parameters
The D32XD/D16XD can transmit and receive MMC (MIDI
M
achine Control) messages.
This means that when synchronizing two D32XD/D16XD
units, or when using the D32XD/D16XD with a MMC-com-
patible MIDI sequencer, you can control operations such as
song playback, and stop from the master device.
You can use MIDI Time Code to synchronize the D32XD/
D16XD with an external MIDI sequencer or other device, so
that the D32XD/D16XD’s track audio will play back in syn-
chronization with external MIDI source sources.
The D32XD/D16XD can operate in synchronization with an
external MIDI device by using MTC (MIDI Time Code) syn-
chronization.
The device that outputs the synchronization clock is called
the master, and the device that receives this clock is called the
slave. The D32XD/D16XD can function either as the master
or slave.
Some MIDI devices may not support the MMC functionality of
the D32XD/D16XD. For details on the MMC functionality of the
D32XD/D16XD, refer to the MIDI implementation.
MIDI Clock can be received if you select MIDI Clock in the TEM-
PO “Tempo Track”
tab page and record the tempo track.
1. Control Change
Here you can turn control change message reception/
transmission on (highlighted) or off.
When you operate mixer parameters, the D32XD/D16XD
will transmit corresponding messages. These messages
can be recorded on an external MIDI sequencer, and the
re-transmitted back to the D32XD/D16XD to control the
corresponding mixer parameters.
For details on the parameters you can control, refer to the
MIDI implementation.
MIDI control of effects can be used regardless of the Control
Change on/off setting.
These messages will be received only if Automation ( →p.104,
[*108]) is turned off.
2. Program Change
Here you can turn program change message reception/
transmission on (highlighted) or off.
When you switch scenes, the D32XD/D16XD will trans-
mit a corresponding program change message. These
1
1
7. MIDI/SYNC
5
4
1
6 7
2 3
9 8
SYSTEM
MIDI/ SYNC