KORG XTENDED DEFINITION D32XD - Manual (Page 194)

184
<MONITOR OUTPUT L/R>
<AUX OUTPUT 1–4 [*1, 2]>
<PHONES 1, 2>
<S/P DIF INPUT/OUTPUT>
<USB>
<ADAT INPUT/OUTPUT>
<WORD CLOCK INPUT/OUTPUT>
<MIDI IN/OUT>
<FOOT SW>
<EXPRESSION PEDAL>
■ Included items
■ Separately sold options
* Appearance and specifications of this product are
subject to change without notice. (07, 2003)
Connectors: 1/4" phone jack (balanced)
Output impedance: 150 Ω or higher
Nominal level: +4 dBu
Maximum level: +16 dBu
Load impedance: 10 k Ω or higher
Connectors: 1/4" phone jack (unbalanced)
Output impedance: 150 Ω
Nominal level: –10 dBu
Maximum level: +2 dBu
Load impedance: 10 k Ω or higher
Connector: 1/4" stereo phone jack
Output impedance: 100 Ω
Maximum level: 50 mW @ 32 Ω
Connector: optical
Format: 24-bit S/P DIF (IEC60958)
Connector: Type B
Format: Slave, USB 1.1 compliant
Supported OS: Window Me, Windows 2000 or later
Mac OS 9.0.4 or later
* If using the D32XD/D16XD with Windows
98, please refer to the Korg website or
contact your Korg distributor.
* If the ADAT I/O board (DIB-8) is installed
Connectors: Optical
Format: ADAT Type I/II format
* If the ADAT I/O board (DIB-8) is installed
Connectors: BNC
Format: TTL/75 Ω
Connectors: DIN 5-pin × 2
Connector: 1/4" phone jack (use separately sold PS-1)
Connector: 1/4" stereo phone jack
(use separately sold XVP-10 or EXP-2)
AC cable
Owner’s manual
PS-1 pedal switch
XVP-10 EXP/VOL pedal
EXP-2 foot controller
8-channel analog compressor board (ACB-8)
8-channel analog input board (AIB-8)
ADAT I/O board (DIB-8)