Using the continuous-advance modes – Konica Minolta 109678 User Manual

Page 48

Advertising
background image

48

Advanced recording

Using the Continuous-advance modes

The continuous-advance drive modes allow a series of
images to be captured while holding down the shutter-
release button. These drive modes are set in section 1 of the
recording menus.

Drive mode

Image size

Key func.

Self-timer

Single

Progressive
Bracketing

Quality

Continuous

Compose the picture as described in the basic recording
operation section (p. 22). Press the shutter-release button
partway down (1) to lock the focus and exposure for the
series.

Press and hold the shutter-release button all the way down
(2) to begin taking pictures; focus is locked with the first
frame. When the shutter-release button is pressed and held,
the camera will begin recording images until the maximum
number has been taken or the shutter button is released.

The maximum number of frames and the rate of capture
depends on the continuous-advance drive mode selected.
See the notes section on the following page.

White balance

:enter

:select

Immediately after selecting the continuous option on the
menu, a selection screen is displayed to select between
standard and UHS continuous advance. Use the left/right
keys of the controller to select the continuous advance
mode. Press the central button of the controller to set the
drive mode. Pressing the menu button cancels the operation
without changing the drive mode.

2

1

Advertising
This manual is related to the following products: