Konica Minolta 109678 - Manual (Page 96)

96 Setup menu
Frame the subject as described in the basic operation section and press the shutter-release button
partway down. Confirm the image has stabilized on the monitor and press the shutter-release but-
ton all the way down to take the picture.
Three options are available for the Anti-shake system in section 4
of the setup menu (p. 86):
Display + Exp. - when the shutter-release button is pressed part-
way down, the anti-shake function will activate. The affect of the
Anti-shake system can be seen in the live image.
Exposure - Anti-shake is only applied during the exposure and is
not apparent in the live image. When the shutter-release button is
pressed partway down, wait a moment before taking the picture
for the Anti-shake system to stabilize the image.
Off - Anti-shake will not activate.
The Anti-shake system is less effective at short subject distances or when using the macro function
(p. 35). The use of a tripod is recommended. Anti-shake is not effective with a tripod mounted cam-
era; turn off the Anti-shake function to conserve power.
A thermometer indicator replaces the Anti-shake indicator when the camera is overheat-
ing because of high operating or ambient temperatures. When taking still images, the
Anti-shake system is used only for the exposure. When taking movies, Anti-shake is can-
celed. Allow the camera to cool before using Anti-shake.
Video output
Transfer mode NTSC
Data storage
10 sec.
Disp. + Exp.
Anti-shake
Self-timer