Kenwood NEXEDGE NX-411 - Manual (Page 25)

12
MENU MODE
Many functions on this transceiver are selected or configured
through the Menu instead of physical controls. Once you
become familiar with the Menu system, you will appreciate the
versatility it offers.
M
ENU
A
CCESS
1 Press the key programmed as Menu.
• The category list is shown.
• When there is only 1 category, the function list is shown
(proceed to step 4).
2 Press / to select a category item.
• On keypad models, you can enter a category number directly.
3 Press or to view the function list.
4 Press / to select a function item.
• On keypad models, you can enter a function number directly.
5 Press or to set up the selected function item.
• Press or # to return to the category list.
6 Press / to select your desired setting.
• For settings with more than 1 level, repeat steps 5 and 6.
7 Press or to set the selected setting and exit Menu mode.
• Press or # at any time to return to the previous display.
• Press at any time to exit Menu mode..
M
ENU
C
ONFIGURATION
Some transceiver keys may already be programmed with
functions listed in the Menu. Those functions can be accessed
directly by pressing the key. All other functions can still be
accessed using the transceiver Menu. The following table lists
the available Menu items.
Display Description
AUTO REPLY MSG Auto Reply Message ON/OFF
AUTO TELEPHONE Auto Telephone
AUTO DIAL Autodial Mode
AUTO DIAL PROG Autodial Programming Mode
AUX AUX ON/OFF
BROADCAST Broadcast ON/OFF
CLOCK Clock ON/OFF