Kenwood NEXEDGE NX-411 - Manual (Page 34)

21
■ Stun Code
This function is used when a transceiver is stolen or lost.
When the transceiver receives a call containing a stun
code, the transceiver becomes disabled. The stun code is
cancelled when the transceiver receives a call with a revive
code.
T
RUNKING
C
ALLS
■ Making a Telephone Call
Manual Dialing (Analog)
1 Select your desired zone and telephone group ID.
2 Press
the PTT switch to start the call.
3 Enter your desired number using the DTMF keys.
Selecting a Number from the List
1 Select your desired zone and telephone group ID.
2 Press the key programmed as Autodial.
• The last called unit appears on the display.
3 Press / to select your desired list number.
4 Press the PTT switch to make the call.
■ Receiving a Telephone Call
When a call is received, press and hold the PTT switch to
speak, and release it to receive.
• Only one person can speak at a time.