Samsung SGH-A308 - Manual (Page 14)

G Ge et tt ti in ng g S St ta ar rt te ed d
27
G Ge et tt ti in ng g S St ta ar rt te ed d
26
Barring Password
The 4-digit barring password is required when you use
the Call Barring function. You obtain the password from
your service provider when you subscribe to this function.
See page 115 for further details.
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM cards, is
required to access specific functions, such as setting the
maximum cost of a call. These functions are available if
supported by your SIM card.
If you enter an incorrect PIN2 three times in succession,
the code is disabled and you cannot access the
functions until you re-enable it by entering the PUK2.
To change the PIN2, refer to page 111 (menu option 6.7).
PUK2
The 8-digit PUK2 (Personal Unblocking Key 2), supplied
with some SIM cards, is required to change a disabled
PIN2. If you lose the code, contact your service provider.
To re-enable your PIN2, proceed as follows.
1. Key in the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the
OK soft key.
3. When the Confirm PIN2 message is displayed, key
in the same code again and press the OK soft key.
If you enter an incorrect PUK2 ten times in succession,
you will not be able to access the functions requiring
the PIN2. Contact your service provider for a new card.