Basic operations – Kawai LH-1 User Manual

Page 9

Advertising
background image

9

1. Basic Operations

Setting Up the LH-1

Consider instrument placement before playing the LH-1:

For best sound quality, the instrument should be placed in an open area and should not be
confined or surrounded by walls, curtain screens or similar furniture.

The Bass sounds radiate virtually 360 degrees around the base of the LH-1.

Mid-range and treble sounds project at a wide angle from the top rear of the instrument (the
side away from the player).

Additionally, there are hidden monitor speakers at each end of the control button panel that
project sound toward the player.

AC Power

The LH-1 is supplied with a three-wire attached AC power cord. Plug this instrument into a
properly wired three-wire grounded AC outlet only.

Power Switch

The Power On Button is located on the left (bass) end of the front panel. Press this button
one time to turn power ON. Press it again to turn power OFF.

If you haven’t already done so, press the power button to turn on power.

Volume Control

Adjust the VOLUME SLIDER to a minimum low level when you first turn on the instrument
especially when using headphones. Then, adjust volume upward to a comfortable listening
level.

Advertising