Start-up guide, Using your new dishwasher – Kenmore 665.1388 User Manual

Page 8

Advertising
background image

8

START-UP GUIDE

Before using your dishwasher, remove all packaging materials. Read this entire Use and Care Guide. You will find important safety
information and useful operating tips.

Using Your New Dishwasher

1. Rinse aid is essential for good drying. Be sure to fill the

dispenser before you use your new dishwasher. Each filling
will last about 1 to 3 months depending on your usage.

2. Scrape large food soil and hard items (toothpicks or bones)

from dishes.

3. Properly load the dishwasher. (See “Dishwasher Loading.”)

Load dishes with space in between so water will reach the
soiled surfaces. Make sure nothing keeps the spray arm(s)
from spinning freely.

4. Add detergent. Always use a quality brand detergent. (See

“Dishwasher Use.”)

5. Push door firmly closed. The door latches automatically.

6. Run hot water at the sink nearest your dishwasher until the

water is hot. (See “Dishwasher Efficiency Tips.”) Turn off
water.

7. Press the recessed area near the desired cycle and option

selections. (See “Dishwasher Use” and “Featuring
S

MART

T

OUCH

™ Controls.”)

8. Press START/RESUME or press START/RESUME to repeat

the same cycle and options as the previous cycle.

IMPORTANT: The Start/Resume light will flash if the door is
opened during a cycle. Power interruptions during a cycle
may also cause the Start/Resume light to flash. Press START/
RESUME to continue a cycle.

MAIN WASH

PRE-
WASH

Advertising
This manual is related to the following products: