King Kutter Free Floating Finishing Mower User Manual
Page 26
MAINTENANCE SAFETY
z
Good maintenance is your responsibility. Poor maintenance is an invitation to trouble.
z
Follow good shop practices.
z
Keep service area clean and dry
z
Be sure electrical outlets and tools are properly grounded
z
Use adequate light for the job at hand.
z
Make sure there is plenty ventilation. Never operate the engine of the towing vehicle
in a closed building. The exhaust fumes may cause asphyxiation.
z
Before working on this machine, disengage the PTO, shut off the engine, set the
bakes, and remove the ignition keys.
z
Be certain all moving parts on attachments have come to a complete stop before
attempting to perform maintenance.
z
Never work under equipment unless it is blocked securely.
z
Always use personal protection devices such as eye, hand and hearing protectors,
when performing any service or maintenance.
z
Frequently check mower blades. They should be sharp, free of nicks and cracks
and securely fastened.
NOTE: Blade bolts are left hand thread!
z
Periodically tighten all bolts, nuts, and screws and check that all cotter pins are
properly installed to ensure unit is in safe condition.
z
When completing a maintenance or service function, make sure all safety shields
and devices are installed before placing unit in service.
z
After servicing, be sure all tools, parts and service equipment are removed from
mower.
z
Do not allow debris, grease or oil to build up on any deck or platform.
z
Where replacement parts are necessary for periodic maintenance and servicing,
genuine factory replacement parts must be used to restore your equipment to origi-
nal specifications.
z
The manufacturer will not be responsible for injuries or damages caused by use of
unapproved parts and/or accessories.
z
A fire extinguisher and the first aid kit should be kept readily accessible while per-
forming maintenance on this equipment.
STORAGE SAFETY
z
Following operation, or when unhooking the mower, stop the tractor, set the brakes,
disengage the PTO, shut off the engine and remove the ignition keys.
z
Store the unit in an area away from human activity.
z
Do not park equipment where it can be exposed to direct contact to livestock for long
periods of time. Damage and livestock injury could result.
z
Make sure all parked machines are on a hard, level surface and engage all safety
devices.
26