Kenwood DIGITAL AUDIO KDC-8070R - Manual (Page 10)

Press the SRC button repeatedly until the tuner mode is
obtained. "TUNER" is displayed only when the tuner mode is
selected.
Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches
between the FM1, FM2 and FM3.
Press the AM button to select the MW and LW bands.
• Auto Seek Tuning
Press the ¢ button to seek increasing frequencies.
Press the 4 button to seek decreasing frequencies.
• Preset station seek tuning
Press the ¢ button to move to the next preset station (i.e.,
the one with the next highest number), and the 4 button to
move to the last preset station (i.e., the one with the next
3
2
1
Tuning
You can choose from three tuning modes: auto seek, preset
station seek, and manual. The “AUTO 1” indicator lights up
when auto seek tuning is selected, and the “AUTO 2” indicator
lights when preset station seek tuning is selected.
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the tuning function
appears in the display.
Press the
4 button to search in the other direction.
The tuning method is displayed as ”Auto 1“, ”Auto 2“, or
”Manual“ referring respectively to auto seek tuning, preset
station seek tuning, and manual tuning.
Switching settings
Press either the AM button or FM button to switch the tuning
mode.
The display and setting will change.
Press the MENU button to end the menu mode. 4
3
2
1
Selecting Tuning Mode
Tuner features
— 10 —
English
ST indicator
AUTO indicator Preset station number
Band display
Character Frequency
KDC-PS9070R
MENU
EJECT
SCAN RDM REP D.SCN M.RDM
OFF
DAB
DISP
NAME.S
DISC PTY
TI
DISC 44W 4
LOUD VOL ADJ
SRC
MENU AM
FM 4 ¢
#1-6
KDC-8070R/8070W/7070R
AUTO indicator ST indicator
Preset Station Number
Band display
Mode display
Frequency