Kenwood DIGITAL AUDIO KDC-8070R - Manual (Page 40)

A–4 Pin (Yellow)
A–7 Pin (Red)
Ignition cable (Red)
Battery cable (Yellow) If no connections are
made, do not let the cable
come out from the tab.
Connect either to the power control terminal
when using the optional power amplifier, or to
the antenna control terminal in the vehicle.
To connect the KENWOOD navigation
system, consult your navigation manual.
NOTE
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
To "EXT.AMP.CONT." terminal of the amplifier
having the external amp control function.
To connect the Disc changer or DAB unit, consult each
manual.
NOTE
KENWOOD disc changer/DAB control input
Front left output (White)
Front right output (Red)
Rear left output (White) / Non-fading left output
(White) (KDC-8070R/8070W)
Rear right output (Red) / Non-fading right output
(Red) (KDC-8070R/8070W)
Non-fading left output (White)
(KDC-PS9070R only)
Non-fading right output (Red)
(KDC-PS9070R only)
Antenna Conversion Adaptor (ISO–JASO) (Accessory3)
Antenna Cord (ISO)
FM/AM antenna input
Display Data Output
Jack
Outputs data
representing the unit's
current state, causing it
to appear in the external
display.
To connect to this jack,
a converting adapter
(optional) is necessary.
(KDC-8070R/8070W
only)
Fuse (10A)
Wiring harness
(Accessory1)
External amplifier control cable
(Pink / Black)
— 40 —
English
Connecting Cables to Terminals
TEL MUTE
EXT.AMP
P.CONT.OUT
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
REAR
FRONT
NON-FAD
Connector Function Guide
Pin Numbers for
ISO Connectors
Cable Colour Functions
External Power
Connector
A–4
A–5
A–6
A–7
A–8
Speaker
Connector
B–1
B–2
B–3
B–4
B–5
B–6
B–7
B–8
Yellow
Blue/White
Orange/White
Red
Black
Purple
Purple/Black
Gray
Gray/Black
White
White/Black
Green
Green/Black
Battery
Power Control
Dimmer
Ignition (ACC)
Earth (Ground)
Connection
Rear Right ( + )
Rear Right ( – )
Front Right ( + )
Front Right ( – )
Front Left ( + )
Front Left ( – )
Rear Left ( + )
Rear Left ( – )
Power control / Motor
antenna control cable
(Blue/White)
Connector B
Connector A
TEL mute cable (Brown)
DC/DC converter box
(Wrap the cushion
(accessory9) around this
box.)(KDC-PS9070R only)
Separate this box from the unit and antenna cords. If they
are too close, it may cause the reception to get noise.
2CAUTION