Konftel G510-7276-00 - Manual (Page 103)

32.yy Replace Unsupported <color> Cartridge
Replace the unsupported toner cartridge with a supported one.
34 Short paper
Try one or more of the following:
• Press to clear the message and continue printing.
• Press , and then press to cancel printing.
35 Insufficient memory to support Resource Save feature
The printer lacks sufficient memory to save settings. Install additional memory, or press to disable Resource Save
and continue printing.
37 Insufficient memory to collate job
The printer prints the pages that were spooled prior to the collation message and collates the remainder of the print
job.
Try one or more of the following:
• Press to clear the message and continue printing.
• Press , and then press to cancel printing.
37 Insufficient memory for Flash memory Defragment operation
The printer cannot defragment flash memory because the memory used to store undeleted flash resources is full.
• To perform the defragment operation, delete fonts, macros, and other data in the memory, or install additional
printer memory, and then press
to continue printing.
• Press , and then press to cancel printing.
38 Memory Full
The printer does not have enough memory available to continue printing. You cannot press because of this.
Try one or more of the following:
• Press , and then press to cancel printing.
• Simplify the print job by reducing the amount of text or graphics on a page and deleting unnecessary downloaded
fonts or macros.
• Install additional printer memory.
39 Complex page, some data may not have printed
The page is too complex to print. Press , and then press to cancel printing.
40 <color> Invalid refill, change cartridge
Replace the toner cartridge with a new one.
Understanding printer messages
101