Konftel G510-7276-00 - Manual (Page 105)

56 Standard USB port disabled
Try one or more of the following:
• Press to clear the message and continue printing.
The printer discards any data received through the USB port.
• Make sure the USB port is not set to Disabled.
58 Too many flash options installed
Too many optional flash memory cards or too many optional firmware cards are installed on the printer.
Try one or more of the following:
• Press to clear the message and continue printing.
• Remove extra flash options:
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove extra flash options.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
58 Too many trays attached
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the additional trays.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
59 Incompatible tray <x>
Remove the specified tray.
82 Replace waste toner box
Replace the waste toner bottle. For more information, see “Replacing the waste toner bottle” on page 108.
82.yy Waste toner box missing
Replace the waste toner bottle, and then press to clear the message and continue printing.
82.yy Waste toner box nearly full
Press to clear the message and continue printing.
88.yy <color> Cartridge is low
Press to clear the message and continue printing.
Understanding printer messages
103