Automatic adjustment of the recording level (crls), Dolby hx pro, Points for recording from a cd or an md – Kenwood FM/AM Reciever R-SE7 User Manual

Page 30

Advertising
background image

R-SE7/DP-SE7/X-SE7 (En)

30

Preparation section

Basic section

Application section

Knowledge sections

Recording

To repeat a recording

Press the rewind key during recording.

Automatic Adjustment of the Recording Level (CRLS)

A standard recording level has been set in advance for the cassette deck (X-SE7), but when the CRLS
function is used, the max. recording level is set automatically for the music source.

2 Press the CRLS key.

÷ If there is a non-recorded space of more than 4 seconds

before the recording start position, recording is aborted
and tape is rewound as shown below.

÷ If there is no recorded tune before, the tape will be

rewound then stopped.

Tape stops after 2 sec. of transport.

Tune to be re-recorded

Blank of 4 sec. or more

Re-recording

Recorded tune

Dolby HX Pro

The Dolby HX Pro headroom extension system records high frequencies such as the cymbal sound clearly by controlling
the bias current during recording according to the frequency composition of the sound being recorded. This system is
activated automatically during recording with this unit.

Points for Recording from a CD or an MD

For recording from a CD or an MD, playback from
the music source and recording by the cassette deck
can be started simultaneously (synchro recording
function) when the cassette deck is set to record
pause status in advance.

1 Pause the CD or MD to be played.

2 Use the skip keys (4 ¢) to select the title

to be recorded. (Pause will be reached at the
beginning of the selected title.)

3 Bring the cassette deck to recording pause

condition.

4 Start playback of the CD or MD.

(Synchro recording will start.)

÷ The recording is stopped when the stop key of the

playback unit is pressed.

During recording of re-
verse side (while

2 is lit)

During recording
of top side
(while

3 is lit)

If the key has never been pressed

.....The sound is recorded with the basic level set with the

unit.

If the key is pressed

.....The recording level is set automatically and stored in

memory as the recording level to be used with the
current input being selected. From the next time on,
this recording level is set automatically for that input
even if the key is not pressed.

To return to the basic level

.....Hold the key depressed until the indicator goes off

(for approx. 3 seconds).

÷ The recording level setting completes in approx. 20

seconds, after which the deck enters the record-pause
mode.

÷ If recording is started during the setting (while the CRLS

indicator is blinking), distorted sound may be recorded.

÷ If a non-recorded space of more than 3 seconds is

detected after the CRLS key is pressed, the recording
level setting is aborted.

1 Play the contents to be recorded

(or receive the radio station to be recorded).

About 20 sec

Return to the recording start position.

1

¡

CRLS

CRLS

CRLS

Advertising
This manual is related to the following products: