Kenwood FM/AM Reciever R-SE7 - Manual (Page 44)

R-SE7/DP-SE7/X-SE7 (En)
44
Preparation section
Basic section
Application section
Knowledge sections
Enter the minute.
Enter the hour.
Activate the clock adjustment mode.
Clock adjustment
This unit incorporates a clock function. Be sure
to adjust the correct time before using the timer
function.
1
1
÷ The time of the day is represented in 12-hour AM/PM
method.
÷ Press the “enter” key. The hour is entered and the
minute display starts to blink.
2
2
Ensure that the power is OFF.
1
2
3
Example: Adjustment to 8:45
÷ The time display starts to blink.
÷ If you make a mistake, restart from the beginning.
÷ To adjust correct time, press the “enter” key at the same
moment as a time announcement.
÷ The time display blinks after a power failure or when the
power cord has been unplugged from the AC outlet and
plugged again. In such a case, adjust the clock again.
To decrease
the figure To increase
the figure
To decrease
the figure To increase
the figure
R-SE7
R-SE7
R-SE7
auto/mono
volume
control pure A
∞ ∞
down up
enter
volume
control pure A
∞ ∞
down up
enter
A M 1 2 ) ) :
A M 8 ) ) :
A M 8 4 5 :