KITCHENAID W10118037B - Manual (Page 17)

17
Install Panel Fasteners
1. Remove the two panel fasteners from the face of the inner
door of the upper drawer.
2. Screw the two panel fasteners into the panel fastener pilot
holes of the overlay panel.
3. Repeat steps 1 and 2 for the lower drawer.
Mount the Overlay Panel
1. Mount the upper overlay panel to the drawer by aligning the
panel fasteners to the two keyhole slots and insert the panel.
2. To secure the overlay panel onto the drawer, push the overlay
panel down until the top of the overlay panel is flush with the
top of the control panel.
3. Using the screws provided, secure the overlay panel to the
inner door by screwing through the inner door and into the ¹⁄₈"
(3.175 mm) pilot holes.
4. Repeat steps 1–3 for the lower drawer.
NOTE: There will only be four pilot holes (two on the left and
two on the right) for the lower drawer.