Loading paper into tray1, Loading paper into the bypass tray – Konica Minolta Di1610 User Manual
Page 106
Advertising
6.1 When the Message “PAPER EMPTY” Appears
6
Di1610/Di1610p
6-3
W
he
n
a Mes
s
age Ap
pear
s
Ch
apt
er
6
Loading Paper into Tray1
1
Remove the Bypass Tray.
2
Load the paper in the tray so that
the front side of the paper (the side
facing up when the package was
unwrapped) faces up.
3
Attach the Bypass Tray in its original position.
Loading Paper into the Bypass Tray
1
Load the paper so that the front
side of the paper (the side facing
up when the package was
unwrapped) faces up.
✎
Note
The Bypass Tray can be
loaded with a maximum of 1
envelope, 1 OHP transparency, 1 card, or 10 sheets of plain paper.
Advertising
This manual is related to the following products: