Konica Minolta Di1610 User Manual
Page 68
Advertising
4.2 Selecting the Paper
4
Di1610/Di1610p
4-7
Ma
ki
ng Copi
es
Ch
apte
r 4
7
Using the 10-Key Pad, enter the
width (X) of the paper.
❍
To clear the entered value,
press the [C] key.
✎
Note
The width can range from
90 mm (3-1/2) to 216 mm
(8-1/2).
When entering the paper size,
refer to the diagram on the
right side of the screen to
check which sides of the paper
are the width and the length.
✎
Tip
Enter the value by mm using
the 10-Key Pad. Refer to the
conversion rate below.
1 inch = 25.4 mm
Width(X)
Length(Y)
Width(X)
Length(Y)
90-216
Tray 1
Bypss Tray
Advertising
This manual is related to the following products: