Konica Minolta 30 - Manual (Page 33)

IMPRINTING THE FILMSTRIP TITLE
63
IMPRINTING THE FRAME TITLE
62
Before taking the picture-
1. Press the title button to display the code for the
title you want.
• Each press of the title button changes the title code to
the next selection.
2. Take the picture. The magnetic data is written
and the selection is canceled for the next
frame.
After the film has been rewound and blinks in the data
panel-
1. Press the title button to display the desired filmstrip
title.
• Each press of the title button changes the title code to the next
selection.
2. Press the shutter release button all-the-way down to set the title.
• The camera advances to write the IX data on the film’s leader, then rewinds the film.
3. When blinks in the data panel again, press the film-chamber release and
remove the film.
• Set the filmstrip title before removing the film.
• Once a filmstrip title is set, it can not be changed or canceled using the camera.
An additional title for the entire roll of film can be selected. Both the filmstrip title and the
frame title will be printed on the back of the print.