Kenwood HM-332 - Manual (Page 20)

Basic section
20
TUNER/band
1 1
4 ¢
3 3
Receiving broadcast station
Up to 40 radio stations can be preset in memory. When the “TUNER/band” key is pressed,
the unit will automatically be switched on
and reception status will be reached.
Collective presetting of stations
Preset call
Auto/manual station switching
One-by-one presetting
1. Press the tuner/band key.
Preset a radio station in memory.
1FM
2AM
2. Preset a radio station in memory (auto preset or auto memory).
÷ If radio stations have already been stored with auto preset or manual preset,
select a station using the
4P.CALL¢ key. Each press of the same key
switches the preset stations in sequence.
When
¢ is pressed: 1=2=3 ... 38=39=40=1...
When
4 is pressed: 40=39=38 ... 3=2=1=40...
Auto tuning : The next broadcasting station will be received
automatically each time this key is pressed.
Manual tuning : Press the
1TUNING¡ key repeatedly until a
station is received. Or hold either key and release
it when the frequency of the desired station is
received.
3. Tuning (Preset Call)
÷ Once stations are stored by auto preset, the present procedure is not
required from the next time, unless you move of house or re-execute
presetting of all tunable stations.
Follow the procedure in "Collective presetting of stations (auto
preset)" to preset automatically the tunable radio stations in your
area.
™
When no stations have been memorized
1 1
3
TUNING
÷ To select a preset station from the remote, use the 4P.CALL¢ key or
numeric keys.