Discs which can be played with this unit, Disc handling precautions disc accessories, Never play a cracked or warped disc – Kenwood HM-332 User Manual

Page 44

Advertising
background image

44

Knowledge section

In case of difficulty

Label side
Playing side

Cleaning

If fingerprints or foreign matter be-
come attached to the disc, lightly
wipe the disc with a soft cotton cloth
(or similar) from the center of the disc
outwards in a radial manner.

Handling

Hold the discs so that you do not
touch the playing surface.

Discs which can be played with this unit

CD (12 cm, 8 cm), and the audio part of CDV, CD-G, CD-EG

and CD-EXTRA.

Use discs that comply with the IEC standard, for example

a disc carrying the

DIGITAL AUDIO

DIGITAL AUDIO

COMPACT

COMPACT

marking on the label surface.

Disc handling precautions

Disc accessories

The disc accessories (stabilizer, protection sheet, protec-
tion ring, etc.) which are marketed for improving the sound
quality or protecting discs as well as the disc cleaner should
not be used with this system because they may cause
malfunction.

Do not attach paper or tape to ei-
ther the playing side or the label side
of the discs.

Sticker

Sticky paste

Never play a cracked or warped disc

During playback, the disc rotates at high speed in the player.
Therefore, to avoid danger, never use a cracked or deformed
disc or a disc repaired with tape or adhesive agent.
Please do not use discs which are not round because they
may cause a malfunction.

Storage

When a disc is not to be played for
a long period of time, remove it
from the player and store it in its
case.

Important Items

Safety tab (accidental erasure prevention tab)

After an important recording has been finished, break the
safety tab, to prevent the recorded contents from being
erased or recorded on accidentally.

For B side

For A side

To store cassette tapes

Do not store the tapes in a place which is subject to
direct sunlight, or near equipment that generates heat.
Keep the cassette tapes away from any magnetic field.

To re-record

Apply tape only to the position where
the tab has been removed.

When there is slack in the tape

In such a case, insert a pencil into the reel hole and wind
the reel hub to remove the slack.

Notes

Notes

2. Endless tapes

Do not use an endless tape, as this could damage the
mechanism of the unit.

1.Note on long tapes

Do not use a tape longer than 90 minutes, for
such tapes will easily cause troubles such as
entanglement around a pinch roller or cutting
off.

N

S

Advertising