Kawai CA-X - Manual (Page 20)

16 KAWAI DIGITAL PIANO CA-X
Recorder
To play back an individual part, use the Part buttons while holding
down the PLAY/STOP button to turn on/off each part. If the LED
indicator is on, that part will play. If the LED indicator is off, that part
will not play.
USING THE PLAY/STOP BUTTON TO START RECORDING
The PLAY/STOP button can also be used to start recording. In this way,
you can insert a blank bar at the beginning of the song.
Press the REC button to enable the piano to record first, then
press the PLAY/STOP button. On pressing the PLAY/STOP button, the
CA piano starts recording regardless of whether you press a key or not.
3.3 E
RASING A
S
ONG
This function allows you to erase any song you do not want to listen to.
To erase a specific song and part, first hold down both the REC and
PLAY/STOP buttons. The LED indicators will display which songs have
been recorded.
Select the desired song to erase by pressing the appropriate SOUND
SELECT button while continuing to hold down both the REC and
the PLAY/STOP buttons. The LED indicator of the selected song will
start flashing.
Press the Part button you want to erase and turn the LED indicator
off. The part will be erased. When both parts for a song are erased, the
song becomes empty.
ERASING ALL THE SONGS
To erase all the songs at once, first turn off the power and then turn
it on again while holding down both the REC and PLAY/STOP
buttons.