Kawai CA-X - Manual (Page 27)

23 FUNCTION BUTTONS
Function Buttons
USER TOUCH
Let’s create your own custom touch curve which will fit your playing style.
Use the VALUE buttons to select “User” while holding down the
TOUCH button.
While still holding the TOUCH button, press the REC button. The
display will show “Play”.
Now start playing the CA piano dynamically from soft to loud in
order to let the CA piano analyze your playing style. While you are
playing, the display changes to show three dots at the bottom.
Press the STOP button when you finish playing. The CA piano will
analyze your playing and create a custom touch curve for you based upon
your playing style. The display briefly shows “Done”.
◆ NOTE
The user touch curve data is saved automatically even after the power is
turned off.
5.2 T
RANSPOSING THE
P
IANO
(T
RANSPOSE
B
UTTON
)
The transpose function lets you raise or lower the piano’s key in half steps.
This is especially useful when you have learned a song in one key and
have to play it in another key. The transpose feature allows you to play
the song in the original key, but hear it in another key.
Press and hold the TRANSPOSE button. While still holding the
TRANSPOSE button, use the VALUE buttons or the keyboard from
C2 to C4 to specify the transposition amount.
The display shows you a number telling you how many half steps up or
down you have transposed the piano. -5, for example, represents a
transposition that is 5 half steps lower. “0” indicates no transposition.
The piano can be transposed up to 12 half steps higher or 12 half steps
lower.
Pressing TRANSPOSE button again turns the TRANSPOSE
function off.
The TRANSPOSE function remembers the current setting as long as the
power is on.